|
Name: Mark Bowers "I do not feel obliged to believe that the same God who has endowed us with sense, reason, and intellect has intended us to forgo their use." - Galileo Galilei TopicsServer Stats10 days, 14 hours, and 23 minutes since last reboot.
[ Server load: 0.01 ] |
Recent comments
|
Popular contentToday's:All time:
|
Recent blog posts |
||
Copyright © 2005-2009 Mark Bowers. All Rights Reserved.
You should: 1. completely
You should:
1. completely remove the board under the crt.
2: Unsolder the flyback and connect it to a transistor to make that it generates the EAT(20-40kv) and 210 v for the anodes.Power it up with 12V
3: Connect the transformer pins in the corrects pins of the crt(DON'T USE A TESTER IT WILL BLOW UP WITH 20KV or WITH 200V high freq.)
4:Connect the h sync to a variable sawtooth oscillator(timebase)
5:Connect the vsync to a variable gain bf amplifier